Material Handling Power UNIT two
General Description
This energy unit features electrical power up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing movement is activated by the solenoid valve with all the lowering velocity controlled from the pressure compensated movement manage valve. Products of this series could be extensively used in the business of logistic devices for instance fork lift, mini lift table, and so on.
Exclusive Notes
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned just before mounting the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which need to also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil shifting is needed just after the initial 100 operation hours,afterwards the moment just about every 3000 hours.
5. The power unit really should be mounted horizontally.
Materials Dealing with Electrical power UNIT 1
Standard Description
This electrical power unit is created to the fork lift sector, consisting of hugely effective gear pump, DC motor, manual raise and reduce valve, tank, ect. The up and down motion are controlled by the lever in the guide release valve, that’s equipped with an electrical switch to activate the motor. The lowing speed is controlled through the stress compensated flow management valve.
Particular Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean every one of the hydraulic elements concerned before set up of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
4. Oil transforming is required soon after the preliminary a hundred operation hrs, afterwards as soon as every single 3000 hours.
five. The electrical power unit shown is created to be mounted horizontally.