Chain No. Pitch Roller diameter Width between inner plates Pin diameter Pin length Plate and attachment dimension Ultimate 10sile strength Weight per meter
P d1
mm mm mm mm mm mm mm mm mm mm kN/lbf kg/m
08B-G1 12.700 8.51 7.75 4.45 20.0 11.80 14.60 24.20 12.3 1.60 18.0/4091 1.19
08B-G2 12.700 8.51 7.75 4.45 34.3 11.80 28.40 24.20 12.3 1.50 32.0/7273 2.07
10A-G1 15.875 10.16 9.40 5.08 24.5 15.09 17.50 31.00 17.0 1.6571 .8/4953 1.70
10B-G1 15.875 10.16 9.65 5.08 23.2 14.70 16.80 30.00 17.0 1.60 19.0/4318 1.62
10B-G2 15.875 10.16 9.65 5.08 39.7 14.70 33.30 30.00 17.0 1.50 44.5/10004 2.56
10B-G2F5 15.875 10.16 9.65 5.08 39.7 14.70 33.30 30.00 25.3 1.50 44.5/10004 2.58
12B-G1 19.050 12.07 11.68 5.72 25.7 16.00 19.60 36.00 21.0 1.85 29.0/6591 2.01
12B-G2 19.050 12.07 11.68 5.72 45.3 16.00 39.10 36.00 16.0 1.85 57.8/13136 3.21
12A-G1 19.050 11.91 12.57 5.94 29.9 18.00 21.40 37.05 21.0 1.85 31.8/7153 2.55
12A-G2 19.050 11.91 12.57 5.94 52.9 18.00 44.50 37.05 21.0 1.85 62.3/14005 4.25
12AF1-G1 19.050 11.91 17.00 5.94 34.0 18.00 26.00 36.00 16.0 1.85 31.8/7153 2.62
16A-G1 25.400 15.88 15.75 7.92 37.2 24.00 27.50 46.00 20.0 2.42 42.0/9545 3.97
16A-G2 25.400 15.88 15.75 7.92 68.0 24.00 57.20 46.00 20.0 2.42 84/18896 7.27
16B-G1F12 25.400 15.88 17.02 8.28 39.7 21.00 29.05 49.00 21.4 1.60 58.0/13047 3.95
20A-G1 31.750 19.05 18.90 9.53 46.8 30.00 34.00 57.60 28.0 3.10 86.7/19503 6.15
20B-G1 31.750 19.05 19.56 10.19 48.0 26.40 36.00 57.00 27.0 3.50 85.0/19318 6.19
24B-G1 38.100 25.40 25.40 14.63 61.6 33.20 47.00 72.60 34.0 4.50 160.0/36363 11.25

Roller Chains with Vulcanised Elastomer Profiles

Vulcanised elastomer profiles are a common decision for roller chains in the transport of delicate goods. They avoid scratching and harm to the products throughout transport. There are a assortment of standard and customised elastomer profiles accessible. For fragile goods, we advocate the ELITE kind, which is made of nitrile butadiene rubber (NBR) with an 80 Shore A hardness. This material gives the best balance of abrasion resistance, cohesive friction, and longevity.

ELITE chains have a special profile with a higher get in touch with ratio. The plates are shot-blasted and tapered for greatest strength. The rollers are seamless and of regular wall thickness. The NBR profile is 80 Shore A difficult and provides superb wear resistance.

Technical specs of Roller Chains with Vulcanised Elastomer Profiles

Chains and Sprockets

Apart from roller chains with vulcanised elastomer profiles, there are many kinds of chains and sprockets to choose from. Some are slender, other folks are wide, and each has a distinct pitch diameter and sprocket bore. For instance, chains with massive pitch diameters need sprockets with bigger tooth than individuals with smaller roller-pin facilities. In the long run, you ought to select sprockets that suit the chain and the equipment properly.

Each kinds of chains and sprockets are very dependable and sturdy items. A steel finish is common. They can be sized for particular apps. There are also numerous diverse sizes of sprockets, which will depend on the volume of torque they need to exert. If you require to select a sprocket with an ANSI variety, you need to select the 1 that satisfies the exact needs of your equipment. Chains and sprockets are created of substantial-quality components and are completed to specific dimensional tolerances.

Steel sprockets have distinct designs and can be utilized for equally kinds of applications. Steel split sprockets are straightforward to install and remove. They can also be created of aluminum. Metallic split sprockets are frequently created from 304-grade stainless metal. Stainless metal sprockets are offered for very corrosive environments.

As a skilled transmission areas manufacturer and provider in China, HZPT gives a range of high-quality drive chains and sprockets for sale. Make contact with now!

Further data

Roller Chain Basics

Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, 10sile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.

Roller sprocket

If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
The diameter of the sprocket is important when choosing the right sprocket for your application. Using a caliper to measure the diameter of a toothless plate is a good way to determine the exact size of the sprocket. A caliper is the diameter of a plate without teeth. On Type B and C sprockets, the hub diameter measures the thickness of the hub.
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with 1 pointing towards the ceiling and the other 2 parallel to the floor.
When shopping for sprockets, it is important to remember that they are designed specifically for a specific chain. All chains are manufactured to specific standards. In the United States, the most common standard is ANSI. The chain pitch is the distance between the center of each pin and the center of the next pin. In the US, the standard is always measured in 8-inch intervals.
In addition to sprocket size, sprocket pitch and the surface area also affect chain life. Unlike belt sprockets, which are made of forged steel, the teeth on roller sprockets are stamped from steel sheet or pressed from powdered metal. The harder the teeth, the longer the chain will last.

Roller chain pitch

The pitch of a roller chain is the distance between the sprocket and the pin. The smaller the thread pitch, the smaller the bushing wear. Generally speaking, the smaller the pitch, the longer the life of the chain. For best performance and longest life, manufacturers recommend a minimum chain pitch of 2% to 3%. Chain pitch is important to ensure proper performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of normal.
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
When sizing a sprocket, measure the chain between the gears with a caliper and compare it to the measurements on the chain size chart. Make sure you have checked all the specs and checked the correct chain pitch. Then, choose the correct chain pitch for your needs. This is a critical step in choosing the right chain. So get the correct pitch for your roller chain. Correct pitch helps ensure maximum performance and safety.
To identify a specific type of roller chain, measure its 10sile strength. This represents the amount of load the chain can withstand before breaking. Another key parameter to consider is fatigue strength. Chains with high fatigue strength are more resistant to rust and wear than chains with low fatigue strength. The numbers on the right in the standard numbering represent normal or light duty chains, while the numbers on the left represent the pitch of heavy-duty chains.
Double pitch roller chains are a variant of single pitch chains. They are manufactured according to ISO 606 and meet the same standards as single pitch chains. They are mainly used in applications with lower requirements for speed and power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch drive series is also used for elevator and long conveyor drives. There are 3 main types of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.

Roller chain width

When buying a roller chain, 1 of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
There are many different types of roller chains. These chains are available for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are usually used for power transmission. Other types include agricultural, automotive, conveyor, multi-strand, and 4-strand chains. These charts also include a chart so you can easily see the exact size you need. Listed below are some of the benefits of buying a roller chain.
Roller diameter and pin diameter are important factors in choosing the correct chain width. The width of the chain is the nearest binary fraction of 5/8 of an inch. It should be at least half the thickness of the sprocket, and the plate thickness is 1-8h the width of the chain. Overweight chains are indicated with the suffix H. The pitch and width of the chain are determined by the working load and machine speed.
The outer links of the roller chain are called pin links. These pins are inserted into the bushings of the adjacent roller links. They are held in place by cotter pins. Pin links are usually pressed into the pins of heavy-duty chains. These pins are used to hold the rollers in place. However, these pin chains can reduce the power rating of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a minimum pitch in inches and ultimate strength of 12,500 x pitch in inches. At the same time, the O-ring chain greatly reduces wear due to its lubricating effect. O-ring and X-ring chains contain a lubricant injected by vacuum when riveting the chain together. Transmission chains are tested and governed by standards bodies such as ANSI. In 2011, the American Society of Mechanical Engineers developed a standard for precision power transmission chains.

Roller chain 10sile strength

One of the most important indicators of roller chain strength is 10sile strength. This measurement refers to the amount of load the chain can withstand before breaking. Another measure, called fatigue strength, refers to the maximum load a chain can withstand before it breaks. The strength of a roller chain depends on its size, the quality of the steel used in its construction, and the heat treatment. There are also differences in the types of shot peening used to treat steel, pitch holes, and link plates.
When choosing a roller chain, the workload is critical. This is the maximum load the chain can withstand before fatigue failure occurs. This measurement is critical because it helps determine the type of load applied to the chain. When deciding which roller chain to buy, be sure to consider the mechanical type and desired strength. Then, make sure it meets strength and load-carrying capacity requirements.
The ultimate 10sile strength of a roller chain is based on the manufacturer’s recommended maximum 10sile strength. However, the actual 10sile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest 10sion it can withstand before breaking. This value is usually expressed in points.
The maximum 10sile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have 2 layers of steel connected by pins that are nearly twice as strong as standard roller chains.
The 10sile strength of a single-strand roller chain is approximately 500 tons. In comparison, a single-chain blockchain has a 10sile strength of 900. The 10sile strength of the 2 is similar, and it is not recommended to choose 1 or the other. Although steel and titanium chains are considered the strongest materials for roller chains, these materials are not magnetic.