1.A connecting hyperlink of an O-ring Chain for common application is pre-coated with grease with the pins. Just before connection, verify the grease to the surfaces of pins, and if your volume of grease is little, apply grease with bare hands. (If gloves are utilized, the grease might be absorbed through the gloves.)
Illustration: When the connecting link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted with the roots on the pins. In case the O-rings come loose due to vibration throughout transport, refit the O-rings in to your roots on the pins.
In this case, make sure you return the grease collected in the roots on the pins towards the central surfaces of the pins, much more at portion A than at portions B proven inside the above illustration. (Portions A is worn as a result of sliding using the bushings.)
two.The chain could be most conveniently connected on the teeth of the sprocket. Engage the backlinks at each ends with the chain with all the sprocket teeth and fit connecting pins. If your sprocket is usually moved, the chain may also be linked around the loosened side.
3. Connecting process
one.Confirm that O-rings are connected to the roots in the pins.
2.When the volume of grease utilized about the connecting pins is tiny, coat the pins with grease with the central portions.
three.Insert the connecting pins into the bushings on the inner links at both ends.
4.Confirm that the grease is utilized to the entire face in the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and even though pressing the connecting plate, set up the spring clip. Confirm whether or not the head (the end with no split) with the spring clip is turned from the feeding course of your chain. (See the next illustration.)
6.Be sure you confirm that the spring clip is securely fitted inside the clip grooves with the connecting pins.
This completes jointing with the connecting website link. Note that grease to the surfaces of connecting pins and O-rings may be removed throughout installation operate. In this instance, re-grease using the grease about the surface with the base chain or the grease within the polyethylene bag during which the connecting website link was contained.