Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive as high as approx 270 degrees for example on camera focus rings. They also provide an economical answer where a big gear is required or an extended stretch (up to 2 metres) of linear motion is preferred. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear movement applications. We offer a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing is definitely applied just within the tooth region. J Series products are also available.
Hardened Ground Racks (KRGF-H – KRGFD-H) : Warmth treated ground gears with high precision and strength has excellent cost-efficiency ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated simply by carburizing. Has high-strength, high wear resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, long life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth height and face width sizes, smaller sized and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and amount of teeth. J Series items are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and amount of the teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and number of tooth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-reducing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is necessary.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications because of its flexibility, where metal racks do no possess this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Guide Rails (ARL) : Guideline Rails for Molder Versatile Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials can be found on demand. Moulded Hostaform Racks can be found to offer a cost-effective alternative where much less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Predicated on the system of a versatile rack and equipment, a rotational joint actuator called vsaFGR can be proposed to regulate the joint stiffness. The versatile gear rack can be regarded as a combination of a nonlinear elastic component and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness can be in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the apparatus displacement, and almost independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with regards to the flexible gear rack is definitely perpendicular to the joint loading force, so the power necessary for stiffness regulating is really as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive of up to approx 270 degrees for example on camera focus rings. They also provide an economical answer where a huge gear is necessary or an extended stretch (up to 2 metres) of linear motion is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear motion applications. We offer a large selection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing is applied only within the tooth area. J Series items are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : High temperature treated floor gears with high precision and power has excellent cost-efficiency ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, long life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and encounter width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and number of the teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and number of teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large selections of modules and amount of teeth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Little pitch racks made of free-slicing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is easy to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is required.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications because of its flexibility, where metal racks do no possess this attribute. Pinions and add-ons are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Instruction Rails (ARL) : Guideline Rails for Molder Flexible Racks.
We offer as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic) Racks are produced with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials can be found on request. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Based on the system of a versatile rack and equipment, a rotational joint actuator called vsaFGR is usually proposed to modify the joint stiffness. The versatile gear rack could be regarded as a mixture of a non-linear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness is definitely in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the apparatus displacement, and almost independent from the joint angular deflection, providing advantages of quick stiffness regulation in a brief displacement of 20 mm. The apparatus displacement with regards to the flexible gear rack is usually perpendicular to the joint loading push, so the power required for stiffness regulating is as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.