General Description
Equipped using the zero leak bidirectional checking sole-noid valves, this energy unit is made for the operation of two independent circuits. Which are respectively for that major and subordinate platforms on the double scissors lift. Two cut-off valves are utilized for reducing the machine manually in situation of electrical power reduction. If much more independent circuits are needed for your application please contact us for availability.
Remark: 1. Please talk to our sales engineer for the diverse pump displacement, motor power or tank capacity.
2. CSA or UL certified motors are available upon request.
Specific Notes
1. The AC motor is of S3 duty cycle, which might only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all the hydraulic elements concerned prior to installation of the energy unit.
three. Viscosity from the oil shoud be 15~46 cst,and also the oil should be clean and free of impurities,N46 hydraulic oil is advisable.
four. The electrical power unit must be mounted vertically.
five. Check the oil level during the tank following the preliminary running from the power unit.
6. Oil altering is needed soon after the first a hundred operation hrs,afterwards the moment each 3000 hours.